Intelligent RCIED Jamming Solution

Technical Specifications

Standard config 4xFPGA chips/24xDDS chips/24xDSP chips

Frequency range 10 MHz � 6 GHz (up to 18 GHz)

Jamming modes Sweeping/Sweeping Over Sweeping/Hopping/ Barrage/Spot

Reactive Jamming Reaction time - 90 ?s (100 MHz)

Command of system Remote Control/Switches on Control Module / Amplifier Modules

Signal programming Software

DISTINCTIVE FEATURES:

� Real-time detection of withstanding RF signal and jamming

on the specific detected channel (Reactive Jamming).

� 4x FPGA chips control 24 DDS chips. Each DDS chip

controls an individual amplifier. Possibility to combine

different jamming signals for single frequency band which

provides high efficiency of jamming at close and far

distance.

� DDS&DSP technologies: can generate any modulations.

� Possibility to adapt the jamming signal for each individual

frequency bandwidth may be adapted in order to cover

the withstanding signal more efficiently. The following

parameters are adapted: sweeping speed, carrier step

size, power, channel raster and modulation. Each

potential threat contains RF features and waveforms.

Thus, the jamming signal is produced in each bandwidth

with adaptable features covering each individual threat

more efficient way.

� Tone/DTMF transmission type offers possibility to

suppress VHF/UHF radios at large distances.

� Special filters provide selectable channels for friendly

communication.

The

constant jamming provides a safe zone in the near-field.

The reactive jamming module detects any withstanding

signal stronger than the noise level created by the constant

jamming. The detected powerful withstanding signals are

precisely blocked at the exact channel bandwidth with the

full power of the dedicated amplifier. The reaction time of 90

micro-seconds offers possibility of detection and blocking

even the fastest frequency hopping radios available on the

market. The solution blocks high power transmitters of

terrorists (HF/VHF/UHF radio) also at near field (15 meters

to the receiver). The reactive jamming module operation

distance is 100 times larger than standard jammers available

on the market. In comparison with standard jamming

systems, INT-J002 core technology is a signal generation

module which allows to design any kind of RF waveform in

order to adapt and cover the withstanding signal efficiently.